Filtri avanzati
Nazione
Categoria
Produttore
Modello
Condizione
Prezzo, EUR
Anno
Cutting
Metalworking - Plasma cutting
More info:
Machine does not include extraction system
___
* Ple...
Maggiori informazioniKOIKE IK 2500 G - 2011
Netherlands
- Working area
- 1000 x 2000 mm
- Stitch width
- 0.8 mm
- Scanning accuracy
- 0.25 mm
- Kerf width
- 3 mm
Plasma cutting - Year: 2016
Extra:
Service Yearly maintained by Koike Europe BV.
Machine in go...
Maggiori informazioniKOIKE DELTATEX 5000 - 2016
Belgium
- Control unit
- Katana-ADV
- Plate size
- 6000 x 3000 mm
- Table height
- 800 mm
- Traverse speed
- 24 m/min
Plasma Cutting
More info:
Laser spot included
Overhead cable bear
VDAF dust filter (outside),...
Maggiori informazioniKOIKE VERSAGRAPH 6000
Netherlands
- Made in
- Japan
- Control Unit
- FANUC Series 300i-MODEL A
- Rail
- 29000 mm, incl. H beams
- Cutting area
- 5000 x 24000 mm
Plasma cutting machine !
More info:
CNC plasma cutter with hypertherm source suction cup, tap a...
Maggiori informazioniEL PROMATIC POWERMAX 1250
Netherlands
- Cutting diameter
- 3000 x 1500 mm
- Cutting speed
- 457 mm/min
- Drilling
- 25 mm
- Dimensions
- L 3500 x H 2800 x W 2000 mm
Plasma Cutting 2000 x 6000 mm -- YOM 2008
More info:
Consumables a lot of parts
No usage in th...
Maggiori informazioniKOIKE NANOGRAPH NG 3000
Netherlands
- Control Unit
- CNC control iCNC
- Rail
- 9.000 mm (incl. H beams)
- Plate size
- 2000 x 6000 mm
- Plasma
- Hypertherm
Plasma cutting 6000 x 4000mm More info: Kjellberg HiFocus 161i with automatic gas console. With a...
Maggiori informazioniKOIKE Gammatec 2040
Belgium
- Made in
- The Netherlands
- Control unit
- Beckhoff CNC controller
- Cutting width max
- 2000 mm
- Cutting length max
- 4000 mm
Portal Cutter / Planer More info: Stepless speeds by means of frequency controllers. Table equipp...
Maggiori informazioniSAFAK Portal Schaafbank
Netherlands
- Made in
- Belgium
- Dimensions
- L 3000 x W 1000 x H 1000 mm
- Weight
- ± 18000-19000 Kg
- Availability
- immediately
Plasma Cutting More info: 1x Autogenous burner 1x Plasma burner 1x Extra recording Including Dona...
Maggiori informazioniSATO Satronik C2500
Netherlands
- Made in
- Germany
- Control unit
- 3010 TopAz SATO
- Plasma source
- Thermal Dynamics 300A
- Working width
- 2000 mm
Duo Plasma 3500x2500 - Plasma Cutting More Details: THC - Torch Altitude Control (digital control...
Maggiori informazioniGrotius Duo Plasma 3500x2500
Belgium
- Made in
- Netherlands
- Control unit
- Ethercat 64 bit
- Type
- Plasma 3500x2500
- Cutting system
- Thermal Dynamics 60i Ampere plasma machine system
CNC Plasma Cutting Double drive with integrated rails on cutting table frame cutting Compact and ...
Maggiori informazioniSTAKO Spektrum
Netherlands
- Made in
- the Netherlands
- Control Unit
- Burny 10 CNC
- Cutting range
- 1500 x 3000 mm
- Material thickness
- 15 mm (máx. 18)
Metalworking - EDM Machine
Used Charmilles industrial machinery – Roboform 20 from 1996 located ...
Maggiori informazioniCharmilles Roboform 20 - EDM Machine - 1996
Netherlands
- Made in
- Switzerland
- Control unit
- Charmilles CNC
- X-Axis travel
- 300 mm
- Y-Axis travel
- 250 mm
Metalworking - EDM Machine
Used CDM Rovella industrial machinery – 3.40 N from 2001 located in T...
Maggiori informazioniCDM Rovella 3.40 N - EDM Machine - 2001
Netherlands
- Made in
- Italy
- X-Axis travel
- 400 mm
- Y-Axis travel
- 300 mm
- Table length
- 650 mm
Discover this premium used Erowa Robot 5-50 XL metalworking machinery from 1989, located in the N...
Maggiori informazioniErowa Robot 5-50 XL I EDM Machine I 1989
Netherlands
- Made in
- Switzerland
- Load capacity horizontal
- 300 x 200N
- Load capacity vertical
- 200 x 100N
- Frequency
- 6.89 Hz
Metalworking - Wire EDM
Used Charmilles industrial machinery – Robofil 290 from 1998 located in ...
Maggiori informazioniCharmilles Robofil 290 - Wire EDM - 1998
Czech Republic
- Made in
- Switzerland
- X-Axis travel
- 400 mm
- Y-Axis travel
- 250 mm
- Z-Axis travel
- 200 mm
Metalworking - Wire EDM
Used Charmilles industrial machinery – Roboform 51 from 1999 located in ...
Maggiori informazioniCharmilles Roboform 51 - Wire EDM - 1999
Poland
- Made in
- Switzerland
- X-Axis travel
- 600 mm
- Y-Axis travel
- 400 mm
- Z-Axis travel
- 450 mm
Discover this high-quality used Engemaq MXE EDM 400 EDM machine from 1991, located in Colombia. T...
Maggiori informazioniEngemaq MXE EDM 400 I EDM Machine I 1991
Colombia
- Made in
- Brazil
- Control unit
- Engemaq EDM 60 S
- X-Axis travel
- 340 mm
- Y-Axis travel
- 200 mm
Metalworking - Wire EDM
Used Charmilles industrial machinery – Robofil 240 CC from 2006 located ...
Maggiori informazioniCharmilles Robofil 240CC - Wire EDM - 2006
Germany
- Made in
- Switzerland
- X-Axis travel
- 350 mm
- Y-Axis travel
- 220 mm
- Z-Axis travel
- 220 mm
Metalworking - Wire EDM
Used Charmilles industrial machinery – Robofil 240CC from 2004 located i...
Maggiori informazioniCharmilles Robofil 240CC - Wire EDM - 2004
Switzerland
- Made in
- Switzerland
- X-Axis travel
- 350 mm
- Y-Axis travel
- 221 mm
- Z-Axis travel
- 221 mm
Metalworking - EDM Machine
Used Charmilles industrial machinery – Robofil 380 from 2005 located ...
Maggiori informazioniCharmilles Robofil 380 - EDM Machine - 2005
Poland
- X-Axis travel
- 400 mm
- Y-Axis travel
- 300 mm
- Z-Axis travel
- 250 mm
- Max. workpiece length
- 850 mm
Metalworking - EDM Machine
Used Makino – EDNC-43 from 1997 located in the Netherlands. This EDM ...
Maggiori informazioniMakino EDNC-43 - EDM Machine - 1997
Netherlands
- Control Unit
- MGF
- X-axis travel
- 450 mm
- Y-axis travel
- 350 mm
- Z-axis travel
- 350 mm
Metalworking - EDM Machine
Used Exeron – 313 from 2002 made in Germany located in the Netherland...
Maggiori informazioniExeron 313 - EDM - 2002
Netherlands
- Made in
- Germany
- X-axis travel
- 620 mm
- Y-axis travel
- 420 mm
- Z-axis travel
- 400 mm
Metalworking - EDM Machine
___
* Please note that this description may have been translated aut...
Maggiori informazioniAristech CNC 550 - EDM Machine - 1998
Poland
- Control Unit
- Aristech 550
- Workpiece size
- 800 x 550 x 540 mm
- Workpiece load
- 600 Kg
- X-Axis travel
- 600 mm
Metalworking - EDM Wire cutting
___
* Please note that this description may have been translate...
Maggiori informazioniSodick A 325 - EDM Wire cutting - 1998
France
- X-Axis travel
- 350 mm
- Y-Axis travel
- 250 mm
- Z-Axis travel
- 218 mm
- Workpiece weight
- 450 Kg
EDM Erosion Machine - Year: 1994
More info:
Machine with 4 Axies
Rotary table Hirschmann H250 ...
Maggiori informazioniAeg Elotherm ELBOMAT 222 BA - EDM Erosion - 1994
Germany
- Control Unit
- Hirschmann H250 NC
- X-Axis travel
- 500 mm
- Y-Axis travel
- 400 mm
- Z-Axis travel
- 300 mm
EDM Sinkers - Year: 1991 Made in: Japan | X-Axis travel: 350 mm | Y-Axis travel: 250 mm | Z-Axis travel: 350 mm
Maggiori informazioniMITSUBISHI M35K - 1991
Belgium
- Made in
- Japan
- X-Axis travel
- 350 mm
- Y-Axis travel
- 250 mm
- Z-Axis travel
- 350 mm
EDM Wire Cutting Machines - Year: 2008 Made in: Beijing | X-Axis travel: 350 mm | Y-Axis travel: 250 mm
Maggiori informazioniAGIE CHARMILLES CUT 20 - 2008
Belgium
- Made in
- Beijing
- X-Axis travel
- 350 mm
- Y-Axis travel
- 250 mm
- Z-Axis travel
- 250 mm
EDM Wire cutting machine ! Working hours: 3787 H | Control unit: CNC LP1 / LP55 | X-Axis travel: 350 mm
Maggiori informazioniSODICK AG 55 L
Belgium
- Working hours
- 3787 H
- Control unit
- CNC LP1 / LP55
- X-Axis travel
- 350 mm
- Y-Axis travel
- 250 mm
Metalworking - EDM Machine
More info:
Include refrigerator
____
* Please note that this descr...
Maggiori informazioniAgie agiecut classic 3s - EDM Machine - 2002
Portugal
- X- Axis travel
- 500 mm
- Y- Axis travel
- 350 mm
- Z- Axis travel
- 400 mm
- Workpiece Weight
- 400 Kg
Metalworking - EDM Eroding machine
More info:
With C-axis
____
* Please note that this descri...
Maggiori informazioniAgie Agiethron integral 3 - EDM - 1995
Germany
- Control unit
- AGIECOM 112.007
- Workpiece dimensions
- 900 x 700 x 350 mm
- Working container
- 1070 x 735 x 450 mm
- Support surface
- 800 x 600 mm
EDM Wire - Year: 1996
More info:
Cabinet not included
_____
* Please note that this descripti...
Maggiori informazioniMITSUBISHI CX20 - 1996
Belgium
- Control unit
- Mitsubishi CNC Control
- X-Axis travel
- 500 mm
- Y-Axis travel
- 350 mm
- Z-Axis travel
- 300 mm
Metalworking - EDM Machine
More info:
Equipped with car threading
Automatic cutting of wire
I...
Maggiori informazioniMakino SP 43 - EDM Machine - 2007
Germany
- X-Axis travel
- 450 mm
- Y- Axis travel
- 300 mm
- Z-Axis travel
- 320 mm
- U / V - Axis travel
- +/- 101 mm
EDM Sinkers - Year: 1996 X-Axis travel: 300 mm | Y-Axis travel: 250 mm | Z-Axis travel: 250 mm | Workpiece d...
Maggiori informazioniAGIE MONDO 20 STAR - 1996
Belgium
- X-Axis travel
- 300 mm
- Y-Axis travel
- 250 mm
- Z-Axis travel
- 250 mm
- Workpiece dimensions
- 630 x 400 x 165 mm
EDM - Wire Cutting Machine
More info:
One fine working machine, the other is defective but can ...
Maggiori informazioni
EDM Sinkers Machines - Year: 1992 Control unit: Mitsubishi CNC Control | X-Axis travel: 350 mm | Y-Axis trav...
Maggiori informazioniMITSUBISHI M35J - 1992
Belgium
- Control unit
- Mitsubishi CNC Control
- X-Axis travel
- 350 mm
- Y-Axis travel
- 250 mm
- Z-Axis travel
- 350 mm
EDM Wire Cutting Machines - Year: 1996 Made in: Switzerland | Working hours: 28986 H | X-Axis travel: 400 mm
Maggiori informazioniAGIECUT 250 HSS CE - 1996
Belgium
- Made in
- Switzerland
- Working hours
- 28986 H
- X-Axis travel
- 400 mm
- Y-Axis travel
- 250 mm
Robot Cutter -- YOM:1999 *Information can sometimes be inaccurate and change without notice! Made in: Japan
Maggiori informazioniFANUC ROBOCUT a 1iA - A04B
Netherlands
- Made in
- Japan
- Control Unit
- Fanuc 18i W
- X-Axis travel
- 550 mm
- Y-Axis travel
- 370 mm
Drilling
Explore this used Voortman V630 CNC Beam Drill Line in The Netherlands, featuring 3 drilling unit...
Maggiori informazioniVoortman V630 I CNC Beam Drill Line
Netherlands
- Made in
- The Netherlands
- Operating range
- 10 x 60 - 450 x 1140 mm
- Positioning weight
- 13200 kg
- Positioning speed X
- 42 m/min
Discover this used Voortman VB750 Beam Saw Drill Line in The Netherlands, featuring 1 drill axis,...
Maggiori informazioniVoortman VB750 I Beam Saw Drill Line
Netherlands
- Made in
- The Netherlands
- Workpiece width
- 50 - 750 mm
- Workpiece height
- 10 - 450 mm
- Drill diameter
- 8 - 40 mm
Metalworking - CNC Drilling
Used Ixion industrial machinery – TL 1001 from 1998 made in Germany ...
Maggiori informazioniIxion TL 1001 - CNC Drilling - 1998
Germany
- Made in
- Germany
- X-axis travel
- 700 mm
- Y-axis travel
- 400 mm
- Z-axis travel
- 1000 mm
Metalworking - Drilling machine
___
* Please note that this description may have been translate...
Maggiori informazioniSunnen ML2000 - Drilling machine - 2005
Belgium
- Capacity- diameter
- 165 mm
- Spindle speed
- 3000 rpm
- Working length
- 254 mm
- Stroke
- 170 mm
Filter / Extraction
Bar Feeder
More info:
Machine with control plug and connection. It does not have pushrods, but ...
Maggiori informazioniLns Quick LOAD SERVO
Netherlands
- Min. Diameter
- 6 mm
- Max. Diameter
- 120 mm
- Bar length
- 100 mm - 1600 mm
- Air pressure
- 5 Bar
Bar Feeder - Year: 2001
More info:
Fmb bar feeder 3mtr met bundelbelader
___
* Please note th...
Maggiori informazioniFmb Turbo 10 65 XT - 2001
Netherlands
- Bar length
- 3200 mm
- Max bar
- Ø 65 mm
- Round bars
- 10 - 65 mm
- Hexagonal bars
- 52 mm
Grinding
Metalworking - Grinding Machines
Used LGB industrial machinery – R1590 from 1994 located in Port...
Maggiori informazioniLGB R1590 - Grinding Machine - 1994
Portugal
- Made in
- France
- Strokes
- 1500 x 960 x 400 mm
- Table area
- 1500 x 700 mm
- Wheel size
- 410 mm
Others
Metalworking - Gear Shaping Machine
Used Fellows industrial machinery – 106 from 1970 located in...
Maggiori informazioniFellows 106 - Gear Shaping Machine - 1970
France
- Made in
- USA
- Max working diameter
- 2700 mm
- Working width
- 200 mm
- Dimensions
- L 5300 x W 2300 x H 3300 mm
Sheet Metal
Metalworking - Guillotine
Used S.M.C industrial machinery – Gh615 x 6 from 2020 located in The N...
Maggiori informazioniSMC GH615 x 6 - Guillotine - 2020
Netherlands
- Made in
- Iran
- Cutting length
- 6150 mm
- Cutting capacity
- 6 mm
- Oil type
- ISO 68
Discover this used Amada GS 630 100-II SY guillotine shear from 2002, located in Switzerland. Thi...
Maggiori informazioniAmada GS 630 I Guillotine Shear I 2002
Switzerland
- Made in
- France
- Cutting length
- 3050 mm
- Max thickness
- 6 mm
- Cutting capacity
- 197 kN
Metalworking - Hydraulic guillotine
Used hydraulic guillotine in excellent condition from Eth, m...
Maggiori informazioniEHT TSS 16 - 31 - Hydraulic guillotine - 1987
Netherlands
- Made in
- Germany
- Table width
- 550 mm
- Table height
- 800 mm
- Cutting angle
- 1 ° 30 '
Guillotine / Cutting Machine Made in: Germany | Cutting width: 780 mm | Feed depth: 780 mm | Max. clamp open...
Maggiori informazioniPOLAR 78 XS
Netherlands
- Made in
- Germany
- Cutting width
- 780 mm
- Feed depth
- 780 mm
- Max. clamp opening
- 120 mm
Metalworking - Guillotine
Used Haco – TS 3006 from 2000 made in Belgium located in Spain. This g...
Maggiori informazioniHaco TS 3006 - Guillotine - 2000
Spain
- Made in
- Belgium
- Cutting length
- 3000 mm
- Cutting capacity
- 6 mm
- Motor power
- 7.5 kW
Metalworking - Guillotine
Used Weinbrenner – TSV 6/3050 from 2000 is made in Germany, with worki...
Maggiori informazioniWeinbrenner TSV 6/3050 - Guillotine - 2000
Slovakia
- Made in
- Germany
- Working hours
- 28872 H
- Control system cybelec
- CybTouch 12
- Max. length of cutting
- 3050 mm