Filtri avanzati
Nazione
Categoria
Produttore
Modello
Condizione
Prezzo, EUR
Anno
Metalworking Machinery ✓ Glomacht offers a wide range of machine tools and metal machinery.
Cutting
Cutting machine - Year: 2015
More info:
Neat Koike cnc cutting machine.
Plates from 3 to 300 m...
Maggiori informazioniKOIKE PNC 12 EXTREME - 2015
Netherlands
- Control unit
- koike D240
- Cutting width
- 1250 x 1500 mm
- Cutting length
- 2500 x 3000 mm
- Rapid travel speed
- 4000 mm/min
Laser cutting machine - Year: 2013
More info:
Portal Laser cutting and engraving machine, honey...
Maggiori informazioniBRM PS N130 150 - 2013
Netherlands
- Made in
- Beijing
- Working area
- 2000 x 1300 mm
- Table height
- 1300 x 600 mm
- Laser power
- 120 - 150 W
Laser Cutting Machine CO2 More info: - Laser security - Machine was totally revised by Adige in 2...
Maggiori informazioniBLM ADIGE-SYS LT COMBO
Netherlands
- Made in
- Italy
- Control Unit
- Sinumerik 840D
- X-Axis
- 3100 mm
- Y-Axis
- 1550 mm
CNC Laser cutting machine - Year: 1999 Control Unit: Sinumerik 840 D | X-Axis travel: 3000 mm | Y-Axis trave...
Maggiori informazioniTRUMPF TRUMATIC L 3030 - 1999
Finland
- Control Unit
- Sinumerik 840 D
- X-Axis travel
- 3000 mm
- Y-Axis travel
- 1500 mm
- Z-Axis travel
- 115 mm
Metalworking - Plasma Cutting
Used Astratec industrial machinery – HS 1530 located in Belgium. T...
Maggiori informazioniAstratec HS 1530 - Plasma Cutting
Belgium
- Made in
- Belgium
- Plasma source
- HiFocus 161i
- Table length
- 3000 mm
- Table width
- 1500 mm
Plasma Cutting Machine - Year: 2002
___
* Please note that this description may have been trans...
Maggiori informazioniStako SPEKTRUM - Plasma Cutting - 2002
Belgium
- Made in
- Netherlands
- Material thickness
- 15 mm
- Cutting range
- 1500 x 3000 mm
- Dimensions
- L 3300 x W 2200 x H 1750 mm
Metalworking - Plasma Cutting
Used SAF – 30 HPC from 2007 made in Germany located in the Netherl...
Maggiori informazioniSAF 30 HPC - Plasma Cutting - 2007
Netherlands
- Made in
- Germany
- Plasma unit
- Nertjet HP125
- Working area
- 3200 x 4850 mm
- Plasma Cutting Capacity (Steel, Aluminum)
- 1 - 20mm
Cutting laser machine - Year: 2007
More info:
Machine in perfect condition
Mazak Maintenance H...
Maggiori informazioniMAZAK STX 48
Belgium
- Control Unit
- Mazatrol preview
- Laser
- CO2 1300 W
- X-Axis travel
- 2500 mm
- Y-Axis travel
- 1250 mm
Water Jet Cutter -- YOM 2003 *Information can sometimes be inaccurate and change wit...
Maggiori informazioniWATERJET WF 1630 CNC
Netherlands
- Stainless steel work table
- 4300 x 2300 mm
- Working height
- 900 mm
- Cutting head
- 3 axis control (XYZ)
- Positioning accuracy
- +/- 1 mm
Waterjet cutter with low usage! More info: Automatic feeding of abrasive Tilt cutting head for pe...
Maggiori informazioniOMAX 80X - Waterjet Cutter
Belgium
- Made in
- USA
- Working Hours
- 1115
- X-Y cutting travel
- 4000 x 2000 mm
- Z-axis
- 203 mm
Laser Cutting Machine *Information can sometimes be inaccurate and change without notice! Made in: Italy
Maggiori informazioni
Metalworking - Plasma Cutting
Used Baileigh industrial machinery – PT-44VH-A from 2013 located i...
Maggiori informazioniBaileigh PT-44VH-A - Plasma Cutting - 2013
Netherlands
- Made in
- USA
- Plasma source
- Thermal dynamics A80
- Table length
- 2500 mm
- Table width
- 1250 mm
Discover this used Koike PNC-12 plasma cutting from 2020, located in The Netherlands. This robust...
Maggiori informazioniKoike PNC-12 Extreme I Plasma Cutting I 2020
Netherlands
- Operating hours
- 50 hours
- Plasma source
- Hyperterm Powermax 125
- Cutting area
- 1500 x 3000 mm
- Cutting thickness
- 25 mm
Metalworking - Plasma Cutting
Used Oxytome industrial machinery – B 40E from 2001 located in Bel...
Maggiori informazioniOxytome.B 40E - Plasma Cutting - 2001
Belgium
- Made in
- France
- Control unit
- Digisaf 100
- Working area
- 2 Tables of 8000 x 2500 mm
- Cutting capacity
- 150 mm
Metalworking - Plasma Cutting
Used Sato industrial machinery – Satronik C 2500 from 2000 located...
Maggiori informazioniSato Satronik C 2500 - Plasma Cutting - 2000
Netherlands
- Made in
- Germany
- Control unit
- Sato CNC - 501
- Plasma source
- Hypertherm Powermax 105
- Cutting length
- 7000 mm
Metalworking - Plasma cutting machine
More info:
Permissible sheet metal thickness: stable cons...
Maggiori informazioniMicrostep HS PA 3001.15 - Plasma cutting machine - 2002
Germany
- Control Unit
- MICROSTEP MSNC500P
- Flame cutting table
- 3000 x 1500 to 500 mm shaft
- Section width
- 500 mm
- Suction duct middle
- Outlet 355 mm diameter
Metalworking - Plasma Cutting
Used Messer Griesheim industrial machinery – Cortina M-4000 from 1...
Maggiori informazioniMesser Griesheim Cortina M-4000 - Plasma Cutting - 1997
Belgium
- Made in
- Germany
- Control unit
- Messer Griesheim KS 20A
- Working hours
- 4247 H
- Plasma type
- Hypertherm HT2000
Metalworking - Plasma cutting
Used Esab – Ultrarex UXD-P 250 from 1998 is made in Sweden, with T...
Maggiori informazioniEsab Ultrarex UXD-P 250 - Plasma cutting - 1998
Belgium
- Made in
- Sweden
- Control unit
- Esab
- Type of source
- Plasma
- Cutting capacity
- 100 mm
Metalworking - Laser cutting machine
More info:
TruLaser 7025 L CO2 with a double head.
The la...
Maggiori informazioniTrumpf TruLaser 7025 L - Laser cutting machine - 2010
Poland
- Control Unit
- CNC Sinumerik 840 D
- Work tables dimensions
- 2500 x 1250 mm
- Working Hours
- 13330 H
- X-Axis travel
- 2500 mm
Metalworking - Plasma Cutting
Used Plasma cutter industrial machinery – 1500 x 3000 located in T...
Maggiori informazioniPlasma Cutter 1500 x 3000 - Plasma Cutting Machine
Netherlands
- CNC controller
- Starfire
- Working length
- 1500 mm
- Working width
- 3000 mm
- Plasma source
- Powertherm 120
Plasma cutting machine
More info:
Neat cnc plasma table in working condition.
With an extracti...
Maggiori informazioniSAF PLASMATOME B20
Netherlands
- Control unit
- Digisaf 510
- Table size
- 6000 x 2000 mm
- Metal length
- 2000 mm
- Maximum capacity
- sheet up to 300 mm thick
CNC Plasma cutting ! More info: Included touchscreen PC. Plasma source: 12 mm | Cutting dimensions: 1100 x...
Maggiori informazioniPLASMA CUTTER CNC
Netherlands
- Plasma source
- 12 mm
- Cutting dimensions
- 1100 x 1100 mm
- Availability
- Immediately
- Observations
- *Information can sometimes be inaccurate and change without notice! Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.
Autogenous welding / Plasma Cutting Made in: Germany | Control unit: CNC Omnicad | Plasma burner: Hypertherm...
Maggiori informazioniMesser Griesheim Cortina DS 3100 (6000 x 2000 mm)
Netherlands
- Made in
- Germany
- Control unit
- CNC Omnicad
- Plasma burner
- Hypertherm hd 3070
- Gas Type
- Propan
Metalworking - Plasma Cutting Machine
More info:
As good as new plasma cnc table RIVA CNC 3000 ...
Maggiori informazioniRiva CNC - Plasma Cutting Machine
Netherlands
- Table size
- 3000 x 1500 mm
- X-Axis travel
- 6500 mm
- Y- Axis travel
- 1446 mm
- Spindle speed
- 18000 rpm
Metalworking - Plasma cutting machine
___
* Please note that this description may have been tra...
Maggiori informazioniMicrostep Mastercut ECO+ - Plasma cutting machine - 2012
Germany
- Working area
- 3000 x 1500 mm
- Max workpiece length
- 3000 mm
- Workpiece width
- 1500 mm
- Piece thickness
- 50 mm
Metalworking - Plasma cutting machine
More info:
Incl. Software with Licence for cut with plasm...
Maggiori informazioniGasparini Spark 2040 - Plasma cutting - 2008
Netherlands
- Cutting size
- 4000 x 2000 mm
- Plasma
- HYPERTHERM HPR 130
- Thickness
- 30 mm
- Dimensions
- L 8000 x W 3000 mm
Plasma Bevel Cutting Machine
More info:
Cutting machine is equipped with a plasma and autogenou...
Maggiori informazioniSTAKO Novum / Hypertherm
Netherlands
- Plasma source
- Hypertherm HT 2000
- Cutting range incl. bevel
- 2000 x 6000 mm
- Cutting range without. bevel
- 2500 x 8000 mm
- Cutting range prepared for extension up to
- 11.000 mm
Plasma cutting machine- Year: 2004
More info:
Machine with Suction without filters. Library wit...
Maggiori informazioniEsab ULTRAREX UXL-P 2750 - Plasma cutting - 2004
Portugal
- Cutting thickness
- 12mm
- Required pressure
- 5-6 bar
- Working hours
- 400 h
- Torch
- PT 20AM
Metalworking - Plasma cutting Machine
More info:
Equipped with torch height control and crash p...
Maggiori informazioniCNC Plasma machine - AM Machinery - Metalworking
Netherlands
- Plate width
- 1500 mm
- Plate Length
- 3000 mm
- Dimensions
- L 3420 x W 2040 x H 1250 mm
- Availability
- Immediately
Plasma cutting machine - Year: 2007
More info:
Plasma rotary head machine for bevel cutting up ...
Maggiori informazioniMicrostep MG 12001.30Pr - 2007
Netherlands
- Work plate
- 12000 x 3000 mm
- Steel cutting
- 40 mm
- Working angle
- 45°
- Plasma Source
- Hypertherm HPR260
Plasma Cutting Machine - Year: 2019
More info:
P80 burner with cap
Cuts up to at least 25mm po...
Maggiori informazioniPlasma CUTTING RS IMMOPRO - Plasma Cutting - 2019
Germany
- Made in
- Germany
- Control unit
- CNC
- Cutting diameter
- 25 mm
- Work area
- 1500 x 1500 mm
Metalworking - Plasma cutting
More info:
Machine does not include extraction system
___
* Ple...
Maggiori informazioniKOIKE IK 2500 G - 2011
Netherlands
- Working area
- 1000 x 2000 mm
- Stitch width
- 0.8 mm
- Scanning accuracy
- 0.25 mm
- Kerf width
- 3 mm
Plasma cutting - Year: 2016
Extra:
Service Yearly maintained by Koike Europe BV.
Machine in go...
Maggiori informazioniKOIKE DELTATEX 5000 - 2016
Belgium
- Control unit
- Katana-ADV
- Plate size
- 6000 x 3000 mm
- Table height
- 800 mm
- Traverse speed
- 24 m/min
Plasma Cutting
More info:
Laser spot included
Overhead cable bear
VDAF dust filter (outside),...
Maggiori informazioniKOIKE VERSAGRAPH 6000
Netherlands
- Made in
- Japan
- Control Unit
- FANUC Series 300i-MODEL A
- Rail
- 29000 mm, incl. H beams
- Cutting area
- 5000 x 24000 mm
Plasma cutting machine !
More info:
CNC plasma cutter with hypertherm source suction cup, tap a...
Maggiori informazioniEL PROMATIC POWERMAX 1250
Netherlands
- Cutting diameter
- 3000 x 1500 mm
- Cutting speed
- 457 mm/min
- Drilling
- 25 mm
- Dimensions
- L 3500 x H 2800 x W 2000 mm
Plasma Cutting 2000 x 6000 mm -- YOM 2008
More info:
Consumables a lot of parts
No usage in th...
Maggiori informazioniKOIKE NANOGRAPH NG 3000
Netherlands
- Control Unit
- CNC control iCNC
- Rail
- 9.000 mm (incl. H beams)
- Plate size
- 2000 x 6000 mm
- Plasma
- Hypertherm
Plasma cutting 6000 x 4000mm More info: Kjellberg HiFocus 161i with automatic gas console. With a...
Maggiori informazioniKOIKE Gammatec 2040
Belgium
- Made in
- The Netherlands
- Control unit
- Beckhoff CNC controller
- Cutting width max
- 2000 mm
- Cutting length max
- 4000 mm
Portal Cutter / Planer More info: Stepless speeds by means of frequency controllers. Table equipp...
Maggiori informazioniSAFAK Portal Schaafbank
Netherlands
- Made in
- Belgium
- Dimensions
- L 3000 x W 1000 x H 1000 mm
- Weight
- ± 18000-19000 Kg
- Availability
- immediately
Plasma Cutting More info: 1x Autogenous burner 1x Plasma burner 1x Extra recording Including Dona...
Maggiori informazioniSATO Satronik C2500
Netherlands
- Made in
- Germany
- Control unit
- 3010 TopAz SATO
- Plasma source
- Thermal Dynamics 300A
- Working width
- 2000 mm
Duo Plasma 3500x2500 - Plasma Cutting More Details: THC - Torch Altitude Control (digital control...
Maggiori informazioniGrotius Duo Plasma 3500x2500
Belgium
- Made in
- Netherlands
- Control unit
- Ethercat 64 bit
- Type
- Plasma 3500x2500
- Cutting system
- Thermal Dynamics 60i Ampere plasma machine system
CNC Plasma Cutting Double drive with integrated rails on cutting table frame cutting Compact and ...
Maggiori informazioniSTAKO Spektrum
Netherlands
- Made in
- the Netherlands
- Control Unit
- Burny 10 CNC
- Cutting range
- 1500 x 3000 mm
- Material thickness
- 15 mm (máx. 18)
Metalworking - EDM Machine
Used Charmilles industrial machinery – Roboform 20 from 1996 located ...
Maggiori informazioniCharmilles Roboform 20 - EDM Machine - 1996
Netherlands
- Made in
- Switzerland
- Control unit
- Charmilles CNC
- X-Axis travel
- 300 mm
- Y-Axis travel
- 250 mm
Metalworking - EDM Machine
Used CDM Rovella industrial machinery – 3.40 N from 2001 located in T...
Maggiori informazioniCDM Rovella 3.40 N - EDM Machine - 2001
Netherlands
- Made in
- Italy
- X-Axis travel
- 400 mm
- Y-Axis travel
- 300 mm
- Table length
- 650 mm
Discover this premium used Erowa Robot 5-50 XL metalworking machinery from 1989, located in the N...
Maggiori informazioniErowa Robot 5-50 XL I EDM Machine I 1989
Netherlands
- Made in
- Switzerland
- Load capacity horizontal
- 300 x 200N
- Load capacity vertical
- 200 x 100N
- Frequency
- 6.89 Hz
Metalworking - Wire EDM
Used Charmilles industrial machinery – Robofil 290 from 1998 located in ...
Maggiori informazioniCharmilles Robofil 290 - Wire EDM - 1998
Czech Republic
- Made in
- Switzerland
- X-Axis travel
- 400 mm
- Y-Axis travel
- 250 mm
- Z-Axis travel
- 200 mm
Drilling
Explore this used Voortman V630 CNC Beam Drill Line in The Netherlands, featuring 3 drilling unit...
Maggiori informazioniVoortman V630 I CNC Beam Drill Line
Netherlands
- Made in
- The Netherlands
- Operating range
- 10 x 60 - 450 x 1140 mm
- Positioning weight
- 13200 kg
- Positioning speed X
- 42 m/min
Discover this used Voortman VB750 Beam Saw Drill Line in The Netherlands, featuring 1 drill axis,...
Maggiori informazioniVoortman VB750 I Beam Saw Drill Line
Netherlands
- Made in
- The Netherlands
- Workpiece width
- 50 - 750 mm
- Workpiece height
- 10 - 450 mm
- Drill diameter
- 8 - 40 mm
Filter / Extraction
Bar Feeder
More info:
Machine with control plug and connection. It does not have pushrods, but ...
Maggiori informazioniLns Quick LOAD SERVO
Netherlands
- Min. Diameter
- 6 mm
- Max. Diameter
- 120 mm
- Bar length
- 100 mm - 1600 mm
- Air pressure
- 5 Bar
Sheet Metal
Explore this high-performance Tecnopromec Alfa C Media Decoiler Line from 2003, located in The Ne...
Maggiori informazioniTecnopromec Alfa C Media I Decoiler Line I 2003
Netherlands
- Made in
- Italy
- Sheet thickness
- 4 mm
- Max sheet width
- 229 mm
- Absorption
- 176 A
Metalworking - Decoiler Line - Profiling Line
Used Tecnopromec industrial machines – Tecno Profi...
Maggiori informazioniTecnopromec - 1 Decoiler Line and 2 Profiling Lines
Netherlands
- Models
- Alfa C - Alfa C Media - Alfa D
- Types
- Decoiler line - Profiling line
- Years
- 2008 - 2003 - 2008
- Made in
- Italy