Filtri avanzati
Nazione
Categoria
Produttore
Modello
Condizione
Prezzo, EUR
Anno
Other - Compressor
Used Atlas Copco industrial machinery – GA 50 VSD from 1998 located in Belgiu...
Maggiori informazioniAtlas Copco GA 50 VSD - Compressor - 1998
Belgium
- Max working pressure
- 13 bar
- Max FAD
- 142 l/s
- Nominal shaft power
- 50 kW
- Max rotation shaft speed
- 4820 rpm
Laser engraving machine - Year:2020
More info:
Machine with accompanying extractor to engrave, ...
Maggiori informazioniTROTEC SPEEDY 100 - 2020
Belgium
- Software
- JobControl-Expert
- Hours engraving
- 137 H
- Laser hours
- 27 H
- Working range
- 610 x 305 x 170 mm
Cutting Laser Machine
More info:
Laser has never been used. Purchased and not used due to movin...
Maggiori informazioniRuijie 1390 - Cutting Laser - 2016
Netherlands
- Working area
- 1300 x 900 mm
- Laser type
- CO2 - CW 5300
- Laser power
- 250W
- Cutting speed
- 600 mm /s
Screw compressor - Stationary air
Notes:
Availability for 1st Week of December
*Informatio...
Maggiori informazioniKAESER SM 12
Belgium
- Air consumption
- 60 m³ / h
- Tank capacity
- 500 LT
- Tank dimensions
- 600 x 600 x 1950 mm
- Max. Pressure
- 11 bar
Others - Electric Trim
Used Neolt – Super Trim 280 from 2012 located in Germany. This electric t...
Maggiori informazioniNeolt Super Trim 280 - Electric Trim - 2012
Germany
- Made in
- Italy
- Cutting width
- 2800 mm
- Carriage speed
- 0.5 m/sec
- Max. cutting thickness
- 7 mm
Other - Forwarder
Used Ponsse machinery – Wisent 8-Wheeler from 2017 located in Germany. This fo...
Maggiori informazioniPonsse Wisent 8-Wheeler - Forwarder - 2017
Germany
- Made in
- Finland
- Working hours
- 11000 H
- Loader
- K70+
- Engine model
- MB OM 934 LA EU Stage V
Otherworking - Horizontal crane
Used Verlinde – 10T from 1996 is made in France. This Horizontal...
Maggiori informazioniVerlinde 10T - Horizontal crane - 1996
Netherlands
- Made in
- France
- Control unit
- Pendant unit
- Maximum load capacity
- 10 ton
- ESR speeds
- 8 m/min
Coordinate Measuring Machine -- YOM: 1999 Approx.
*Information can sometimes be inaccurate a...
Maggiori informazioniMITUTOYO EURO CA574
Netherlands
- Control unit
- CNC CMMC-F Apex
- Metrology Software
- Mitutoyo MCosmos V4.0
- X-Axis
- 500 mm
- Y-Axis
- 700 mm
Industrial Robots *Information can sometimes be inaccurate and change without notice! Working hours: 68.673 H
Maggiori informazioni
Metalworking - Robots
Used ABB industrial machinery – IRB 4400 from 2002 located in Spain. This ...
Maggiori informazioni
Industrial Robots *Information can sometimes be inaccurate and change without notice! Axes: 6 | Payload: 20...
Maggiori informazioni
Others - Robot
Used Fanuc industrial machinery – R-2000iA/200F from 2002 located in The Netherla...
Maggiori informazioni
8-Foot Hydraulic Trowel !
More info:
This fully hydraulic butterfly machine is in neat conditio...
Maggiori informazioniWHITEMAN HTX TURBO
Netherlands
- Working hours
- 1100 H
- Engine
- 4H50TIC turbo diesel engine
- Blades per rotor
- 6
- Rotor
- 10 - 160 Rpm
Wastewater Treatment Unit - 5 up to 56 m3/day
Purpose of use:
- Physico-chemical (waste) water ...
Maggiori informazioniWastewater Treatment Unit - 5 up to 56 m3/day
Netherlands
- Electrical board
- PLC, Unistream de Unitronics
- Influent eccentric screw pump
- 0,06 l/sec up to 0,65 l/sec
- Dosing pumps
- 4
- Settling tanks, parallel
- 2
Cutting Machine Hereby a good maintained Weber Slicer 305; is the entry-level model for state-of-...
Maggiori informazioniWeber Slicer 305 SLC
Netherlands
- Control Unit
- Weber Power Control
- Working hours
- 12500 H
- Made in
- Germany
- Cutting thickness
- 0,5 - 50 mm
Foodworking - Packing
Used Simionato – S12 from 1994 made in Italy located in Italy, with 45 /mi...
Maggiori informazioniSimionato S12 - Packing - 1994
Italy
- Made in
- Italy
- Capacity
- 45 /min
- Weight of packed bags
- 1/2 kg
- Bag width
- 85 mm
Discover this high-quality used Intropack Packing Machine, located in The Netherlands. This effic...
Maggiori informazioniIntropack I Packing Machine
Netherlands
- Made in
- The Netherlands
- Works up to
- 15 kg
- Seal lines
- 7
- Seal device
- Polystar 400 DSM
We hereby offer this used Hyster H4.0FT5 forklift from 2008, located in The Netherlands. This rob...
Maggiori informazioniHyster H4.0FT5 I Forklift
Netherlands
- Load capacity
- 4000 kg
- Lifting height
- 5250 mm
- Load center
- 600 mm
- Power source
- Diesel
We hereby offer this used AXA Komet HFB CNC machine for end processing from 2015, located in Norw...
Maggiori informazioniAXA Komet HFB I CNC Machine for End Processing
Norway
- Working hours
- 1909 H
- Control unit
- Siemens Sinumerik 840D SL
- Connected load
- 40 kVA
- Connection voltage
- 3 x 400 V/230 V/N/PE/50 Hz