Filtri avanzati
Nazione
Categoria
Sottocategoria
Produttore
Modello
Condizione
Prezzo, EUR
Anno
We hereby offer this used Haas ST-30 CNC lathe from 2019, located in Spain. This CNC lathe is exp...
Maggiori informazioniHaas ST-30 I CNC Lathe
Spain
- Working hours
- 900 H
- Control unit
- Haas
- Turning diameter
- 381 mm
- Turning length
- 826 mm
We hereby offer this used Biesse Rover Plast A FT Smart 1531 nesting machine from 2019, located i...
Maggiori informazioniBiesse Rover Plast A FT Smart 1531 I Nesting Machine
Spain
- Made in
- Italy
- X-Axis travel
- 3100 mm
- Y-Axis travel
- 1560 mm
- Z-Axis travel
- 200/250 mm
We hereby offer this used Hurco TM6 CNC lathe from 2007, located in Hungary. This CNC lathe, reno...
Maggiori informazioniHurco TM6 I CNC Lathe I 2007
Hungary
- Control unit
- Hurco Max
- Turning diameter
- 254 mm
- Turning length
- 340 mm
- Swing over bed
- 405 mm
We hereby offer this used Morbidelli Author 600 KXL CNC machining center from 2001, located in Sp...
Maggiori informazioniMorbidelli Author 600 KXL I CNC Machining Center I 2001
Spain
- X-Axis travel
- 4945 mm
- Y-Axis travel
- 1465 mm
- Z-Axis travel
- 280 mm
- Working area
- 4400 x 1385 mm
Explore this high-quality used Caterpillar 3516 STD diesel generator from 1990, located in the Ne...
Maggiori informazioniCaterpillar 3516 STD I Diesel Generator I 1990
Netherlands
- Working hours
- 400/600 H approx.
- No. of Cylinders
- 16
- Nominal output
- 1125 kVA
- Frequency
- 50 Hz
We hereby offer this used Italmac Spring 7000 - 4A profile machining center from 2015, located in...
Maggiori informazioniItalmac Spring 7000 - 4A I Profile Machining Center I 2015
Belgium
- Made in
- Italy
- X-Axis travel
- 7000 mm
- Y-Axis travel
- 220 mm
- Z-Axis travel
- 230 mm
We hereby offer this used Lincoln Electric Eurotome 25 Oxy-Fuel cutting machine from 2018, locate...
Maggiori informazioniLincoln Electric Eurotome 25 I Oxy-Fuel Cutting Machine I 2018
France
- Control unit
- HPC 2
- Cutting width
- 2000 mm
- Cutting length
- 6000 mm
- Equipment
- 2 cutting heads
Explore this used Mazak Integrex 300 4 ST (2008) CNC lathe in Belgium. With approximately 40000 w...
Maggiori informazioniMAZAK INTEGREX 300 4 ST I CNC Lathe I 2008
Belgium
- Control Unit
- Mazatrol
- Working hours
- 40000H approx
- X-Axis travel
- 630 mm
- Y-Axis travel
- 230 mm
We hereby offer this used Biesse Artech Akron 445 edgebanding from 2009, located in Spain. With a...
Maggiori informazioniBiesse Artech Akron 445 I Edgebanding I 2009
Spain
- Made in
- Italy
- Edge thickness
- 0.4 - 10 mm
- Panel thickness
- 10 - 60 mm
- Panel height with rounder
- 35 - 60 mm
We hereby offer used Amada HA250W Band Saw in Belgium, perfect for your metalworking needs. This ...
Maggiori informazioniAmada HA250W I Band Saw I 2011
Belgium
- Cutting diameter
- 30 - 250 mm
- Rectangular cutting capacity
- W 300 x H 250 mm
- Blade speed
- 27-90 m/min, 60 Hz
- Blade size
- L 3505 x T 1.1 x W 34 mm
Explore this top-quality used Stanko VTL 1512 vertical turret lathe from 1982, located in the Cze...
Maggiori informazioniStanko VTL 1512 I Vertical Turret Lathe I 1982
Czech Republic
- Table diameter
- 1120 mm
- Largest turning diameter
- 1250 mm
- Greatest height of the detail
- 1000 mm
- Maximum weight of a detail for 5-160 rpm
- 4000 kg
We hereby offer this used Resato PJ-2-4000 waterjet from 2009, located in Belgium. This high-pres...
Maggiori informazioniResato PJ-2-4000 I Waterjet I 2009
Belgium
- Operating hours
- 4580 H
- Working area
- 3000 x 1500 mm
- Max power
- 30 kW
- Max pressure
- 4000 bar