Filtri avanzati
Nazione
Categoria
Sottocategoria
Produttore
Modello
Condizione
Prezzo, EUR
Anno
We hereby offer this used Kaeser N 753-GC compressor from 2014, located in The Netherlands. It fe...
Maggiori informazioniKaeser N 753-GC I Compressor I 2014
Netherlands
- Cylinders
- 3
- Displacement
- 37 cfm
- Compressor speed
- 1040 - 1300 rpm
- Inlet pressure
- 5 - 13 bar
We hereby offer this used AES Raptor 2142 CNV nesting machine from 2013, located in Belgium. It f...
Maggiori informazioniAES Raptor 2142 CNV I Nesting Machine I 2013
Belgium
- Working area
- 2100 x 4200 mm
- Z-Axis travel
- 200 mm
- X-Y-Z axis speed
- 80 - 80 - 20 m/min
- Spindle taper
- HSK F63
We hereby offer this used Mizrak Advantage 5 edgebanding from 2023, located in The Netherlands. T...
Maggiori informazioniMizrak Advantage 5 I Edgebanding I 2023
Netherlands
- Edge thickness
- 0.4 - 3 mm
- Workpiece thickness
- 8 - 42 mm
- Min workpiece width
- 100 mm
- Feed speed
- 10 m/min
We hereby offer this used Haas ST-30 CNC lathe from 2019, located in Spain. This CNC lathe is exp...
Maggiori informazioniHaas ST-30 I CNC Lathe
Spain
- Working hours
- 900 H
- Control unit
- Haas
- Turning diameter
- 381 mm
- Turning length
- 826 mm
We hereby offer this used SCM Tech Z2 CNC machining center from 2008, located in Slovenia. It off...
Maggiori informazioniSCM Tech Z2 I CNC Machining Center I 2008
Slovenia
- X-Axis travel
- 3060 mm
- Y-Axis travel
- 1735 mm
- Z-Axis travel
- 250 mm
- X-Y axis speed
- 60 m/min
We hereby offer this used SCM Record 100 NT TVN CNC machining center from 2008, located in Sloven...
Maggiori informazioniSCM Record 100 NT TVN I CNC Machining Center I 2008
Slovenia
- X-Axis travel
- 3500 mm
- Y-Axis travel
- 1790 mm
- Z-Axis travel
- 400 mm
- X-Y-Z axis speed
- 105 - 60 - 30 m/s
We hereby offer this used Homag Profi BMG 511/60/12/F/AP CNC machining center from 2011, located ...
Maggiori informazioniHomag Profi BMG 511/60/12/F/AP I CNC Machining Center I 2011
Germany
- Number of axes
- 5 axes
- X-Axis travel
- 6000 mm
- Y-Axis travel
- 1550 mm
- Z-Axis travel
- 500 mm
We hereby offer this used SCM Olimpic K360 edgebanding from 2018, located in Hungary. This high-p...
Maggiori informazioniSCM Olimpic K360 I Edgebanding
Hungary
- Edge thickness
- 0.4 - 6 mm
- Panel thickness
- 8 - 60 mm
- Feed speed
- 11 m/min
- Compressed air
- 6 bar
We hereby offer this used Amada Promecam GPX-840 guillotine shear, located in Portugal. It offers...
Maggiori informazioniAmada Promecam GPX-840 I Guillotine Shear
Portugal
- Cutting length
- 4050 mm
- Cutting thickness
- 8 mm
- Cutting angle
- 2 - 10°
- Chrome-nickel steel
- 6 mm
We hereby offer this used Emme Elle LBRA 1400 polishing machine from 2007, located in The Netherl...
Maggiori informazioniEmme Elle LBRA 1400 I Polishing Machine
Netherlands
- Made in
- Italy
- Table length
- 12500 mm
- Working length
- 3200 mm
- Working width
- 1400 mm
Explore this used Mazak Integrex 300 4 ST (2008) CNC lathe in Belgium. With approximately 40000 w...
Maggiori informazioniMAZAK INTEGREX 300 4 ST I CNC Lathe I 2008
Belgium
- Control Unit
- Mazatrol
- Working hours
- 40000H approx
- X-Axis travel
- 630 mm
- Y-Axis travel
- 230 mm
We hereby offer this used Mikron WF 31D CNC milling machine from 1990, located in Portugal. It is...
Maggiori informazioniMikron WF 31D I CNC Milling Machine I 1990
Portugal
- Control unit
- Heidenhain TNC 355
- X-Axis travel
- 450 mm
- Y-Axis travel
- 400 mm
- Z-Axis travel
- 400 mm