Menu
Advanced Filters
Country
Category
Manufacturer
Model
Condition
Price, EUR
Year
Bending Machines
Profile Bender - Year: 2018 Shaft Size: 130 mm | Roll Size: 410 mm | Capacity Angle toe out: 130 x 130 x 15 mm
Discover more
Plate bending rolls - Year: 2016 Made in: Italy | Bending length: 3100 mm | Rolling capacity: 22 mm | Pre-Be...
Discover more
Bending machine - Year: 2013
Tools Available: Included
Bending tools including sliding and driv...
Discover moreTRACTO TECHNIK TUBOBEND 80 L - 2013
Belgium
- Bending capability
- Ø 76.1 x 2.3 mm
- Max. bending radius
- 190 mm
Cutting - Laser
Laser Cutting Machine Maximum table speed: 3149 in/min | Maximum cutting speed: 787 in/mi | Maximum sheet si...
Discover moreCutting - Plasma
Plasma cutting - Year: 2016
Extra:
Service Yearly maintained by Koike Europe BV.
Machine in go...
Discover more
CNC Plasma cutting ! More info: Included touchscreen PC. Plasma source: 12 mm | Cutting dimensions: 1100 x...
Discover more
Plasma cutting machine !
More info:
CNC plasma cutter with hypertherm source suction cup, tap a...
Discover moreEDM Machines
EDM Wire - Year: 1996
More info:
Cabinet not included
_____
* Please note that this descripti...
Discover more
EDM Sinkers - Year: 1996 X-Axis travel: 300 mm | Y-Axis travel: 250 mm | Z-Axis travel: 250 mm | Workpiece d...
Discover more
EDM Sinkers - Year: 1991 Made in: Japan | X-Axis travel: 350 mm | Y-Axis travel: 250 mm | Z-Axis travel: 35...
Discover more
EDM Sinkers Machines - Year: 1992 Control unit: Mitsubishi CNC Control | X-Axis travel: 350 mm | Y-Axis trav...
Discover moreGrinding Machines
Surface grinding - Year: 2008 More info: Automat. Grinding wheel dressing unit Grinding length: 800 mm
Discover moreLathe
CNC Turning machine - Year: 2003
More info:
Precision lathe with motorized tools and C axis. Ro...
Discover more
Made in: Japan | Control Unit: Mazatrol T2 | X-Axis travel: 100 mm | Z-Axis travel: 290 mm | Turning diame...
Discover more
CNC Turning machine - 2000
More info:
Including 3 chuck, 2 fixed spectacles, 1 pedestrian spect...
Discover moreEMCO E330 4000 EMCOMAT - 2000
The Netherlands
- Control Unit
- Fagor 8055
- X- Longitudinal axis
- 4000 mm
CNC Turning machine - Year: 2007
More info:
Machines with few working hours for its age, equipp...
Discover more
CNC Turning machine - Year: 2005
More info:
Well maintained machine with very few operating hou...
Discover moreCAZENEUVE CTN 210 - 2005
Belgium
- Chuck diameter
- 250 mm
- Max diameter of passage over the bed
- 460 mm
CNC Turning machine - Year: 1993
More info:
Includes chuk tool and 1 feed bar + chip conveyor.
...
Discover more
CNC Turning machine - Year: 2004
More info:
3-axis lathe with programmable tailstock, tool prob...
Discover more
Metalworking - CNC Turning machine
Includes:
- Standard turret with tools
- Original chuck (new...
Discover more
CNC Turning machine - Year: 1995
More info:
Mazak SQT 15 MS
Driven tools.
Last year replaced ...
Discover moreMachining Centres - Horizontal
Cnc Machining centers
Discover more
CNC Machining centres - Year: 2020
More info:
Siemens 828D Shopmill control with 10.4 inch scre...
Discover more
CNC Machining centres - Year: 2020
More info:
5-axis machining center with integrated rotary / ...
Discover more
CNC Machining centres - Year: 2020
More info:
Vertical machining center with tool magazine, wit...
Discover moreMachining Centres - Vertical
CNC Vertical machine centres - Year: 1994 More info: Included approx 34 tools Made in: Japan | Control Uni...
Discover more
Explore this used Haas VF 2 (2017) in Belgium, a precision vertical machining center with a spaci...
Discover more
CNC Vertical Machining Centres - Year: 2017
More info:
*Tools not included!
Optional available...
Discover more
CNC Vertical machining centres - Year: 2000
More info:
The machine has a 4 GB SSD disk built fo...
Discover more
Vertical Machining Centres - Year: 2000
More info:
Many parts renewed:
- X axis
- Clam tool c...
Discover moreMAZAK VTC 200 C - Vertical Machining centres - 2000
Netherlands
- Made in
- United Kingdom
- Control unit
- Mazatrol Fusion 640 M
Brand: QUASER Model: MV154PL Type: CNC Vertical Machining Centre Brand: QUASER | Model: MV154PL | X-axis::...
Discover more
CNC Mchining Centers Table Capacity: 1,500 pounds | X-Axis Travel: 30" | Spindle Speed: 7,500 | Spindle Tape...
Discover more
CNC Machining centres - Year: 2002 Control Unit: Fanuc 16i M | X-Axis travel: 700 mm | Y-Axis travel: 400 mm
Discover more
CNC Vertical machining centres - Year: 2008
More Info:
Built-in INFRA zero point receiver.
Too...
Discover more
CNC Vertical machining centres - Year: 2006
More Info:
5 Axis machine.
HAAS CNC-swivel-rotary ...
Discover more
CNC Machining Centres - Year: 2020
More info:
Siemens 828D Shopmill control with 10.4 inch scre...
Discover moreMetal Saws Machines
Band saw machine - Year: 2008 Made in: The Netherlands | Cutting: Ø 550 mm | Cutting flat: 1020 x 550 mm
Discover more
Band saw machine ! More info: Well-functioning, fully automatic band saw. Max. Saw diameter: 220 mm | Cutt...
Discover moreMilling Machines
More info:
Fine and versatile milling / drilling machine for metal and plastic, with milling cut...
Discover more
CNC Milling machine ! Control Unit: CNC 2102 | X-Axis travel: 500 mm | Y-Axis travel: 300 mm | Z-Axis travel...
Discover more
CNC Milling machine - Year: 2012 Made in: Taiwan | Control unit: Winmax | X-Axis travel: 660 mm | Y-Axis tr...
Discover more
CNC Milling machine ! Control unit: Heidenhain TNC 355 | X-Axis travel: 630 mm | Y-Axis travel: 500 mm
Discover more
CNC Milling machine - Year: 1988 Control unit: Heidenhain TNC 155 | X-Axis travel: 500 mm | Y-Axis travel: 5...
Discover more
CNC Milling machine Control unit: Fanuc M11 | X-Axis travel: 600 mm | Y-Axis travel: 400 mm | Z-Axis travel:...
Discover more
CNC Milling machine !
More info:
The milling machine comes with many accessories. It was comple...
Discover morePresses Machines
Press Brake Machine - Year: 2017 Made in: Turkey | Ton capacity: 175 Ton | Safety distance: 1500 mm | Approa...
Discover more
Press brake machine - Year: 1990
More info:
The machine is controlled by 7 axes: Y1-Y2-XR-Z1-Z2...
Discover more
Press Brake - Year: 1986
More info:
Machine with crowning device.
With various molds, conditio...
Discover morePunching Machines
Punching machine - Year: 1996
More info:
Punching machine 30 tons and with a depth of 750 mm. S...
Discover moreEUROMAC CX 750/30 CNC - 1996
The Netherlands
- Control Unit
- Euromac CNC controller
- Punching capacity
- 30 T
Shearing Machines
Plates mill for sheets up to 2 meters wide ! Working length: 2600 mm | Pre-Bending: 5 mm | Max. Thickness: 6 mm
Discover more