Geavanceerde filters
Land
Categorie
Subcategorie
Fabrikant
Model
Conditie
Prijs, EUR
Jaar
Edgebanding
Woodworking - Edgebanding
Used Holzher machines – Sprint 1321-2 from 2005 located in Belgium. Th...
Kijk hierHolzher Sprint 1321-2 - Kantenbanding - 2005
Belgium
- Bedieningseenheid
- Holzher
- Werkstukdikte min/max
- 6/50 mm
Woodworking - Edgebanding
Used Stefani machines – Solution 86 from 2009 made in Italy and locate...
Kijk hierStefani Solution 86 - Kantenaanlijmmachine - 2009
Spain
- Gemaakt in
- Italië
- Besturingseenheid
- WinEdge Plus
Woodworking - edgebanding
Used BCR – K70 SCD from 1999 made in Italy located in Spain. This edge...
Kijk hier
Woodworking - Edgebanding
Used Casadei industrial machinery – E450 from 2021 located in The Neth...
Kijk hier
Woodworking - Edgabanding
Used SCM Edgebanding B5 L Used wood machinery in good condition manufa...
Kijk hier
Woodworking - Edgebanding
Used SCM – compact 22 from 1994 is made in Italy. This Edgebanding is ...
Kijk hier
Woodworking - Edgebanding
Used Stefani – Solution 8600 made in Italy located in Spain. This edge...
Kijk hierStefani Solution 8600 - Edgebanding - 2007
Spain
- Gemaakt in
- Italië
- Maximale dikte van de randband
- 25 mm
Woodworking - Edgebanding
Used Cehisa industrial machinery – Rapid EP 8 from 2002 located in Spa...
Kijk hier
Woodworking - Edgebanding
Used Cehisa industrial machinery – Compact 4.2 from 2012 located in Th...
Kijk hierCehisa Compact 4.2 - Kantenaanlijmmachine - 2012
Netherlands
- Gemaakt in
- Spanje
- Dikte van de kant
- 2 mm
Woodworking - Edgebanding
Used Biesse industrial machinery – Akron 440 from 2008 made in Italy l...
Kijk hier
Woodworking - Edgebanding
Used Casadei industrial machinery – KC 80 located in The Netherlands. ...
Kijk hier
Woodworking - Edgebanding
Used Brandt Edgebanding KDF 650 C Used wood machinery in good conditio...
Kijk hier
Woodworking - Edgebanding
Used Holzher – Primus 1436 SE from 1994 located in Belgium. This edgeb...
Kijk hierHolzher Primus 1436 SE - Kantenaanlijmen - 1994
Belgium
- Lijmdikte
- 0.3 - 8 mm
- Maximale banddikte
- 51 mm
Woodworking - Edgebanding
Used Cehisa – Rapid EP-7 made in Spain located in Belgium. This edgeba...
Kijk hierCehisa Rapid EP-7 - Kantafwerking
Belgium
- Gemaakt in
- Spanje
- Maximale en minimale lengte van het werkstuk
- 120 mm
Woodworking - Edgebanding
Used Holzher– Sprint 1317 from 2018 is made in Belgium, this Edgebandi...
Kijk hierHolzher Sprint 1317 - Edgebanding - 2018
Spain
- Gemaakt in
- België
- Besturingseenheid
- Holzher Control
Woodworking - Edgebanding
Used Homag industrial machinery – KL 78 /A20/S2/Z from 2001 located in...
Kijk hierHomag KL 78/A20/S2 Z - Kantenbanding - 2001
Netherlands
- Gemaakt in
- Duitsland
- Besturingseenheid
- HOMAG HOMATIC NC 21
Woodworking - Edgebanding
Used Reignmac – RMM723U made in China located in the Netherlands. This...
Kijk hier
Woodworking - Edgebander
Machine in good condition, this includes:
Curved scraper group
Straig...
Kijk hierBrandt Highflex 1220 - Kantenaanlijmmachine - 2015
Portugal
- Gemaakt in
- Duitsland
- Voorafdekgebied
- 2 x 2,2 kW motor
Woodworking - Edgebanding
Used Biesse Edgebanding Akron 435 Used wood machinery in good conditio...
Kijk hier
Woodworking - Edgebanding
Used Cehisa – EP-9 from 2000 is made in Spain, with Feed speed: 10 m /...
Kijk hierCehisa EP 9 - Kantenaanlijmmachine - 2000
Netherlands
- Gemaakt in
- Spanje
- Planklengte (max en min)
- 120 mm
Woodworking - Edgebanding
Used SCM – S 2000 from 2008 is made in Italy. This Edgebanding is equi...
Kijk hier
Woodworking - Edgebanding
Used Boere – Elite B from 1998 is made in the Netherlands. This Edgeba...
Kijk hier
Woodworking - Edgebanding
Used Holzher – 1402 MFE from 1999 is made in Belgium, with Feed speed:...
Kijk hierHolzher 1402 MFE - Kantenaanlijmmachine - 1999
Spain
- Gemaakt in
- België
- Dikte van de kant
- 0.4 - 3 mm
Woodworking - Edgebanding
Used Hirzt – NEK 5 R from 2006 is made in Italy. This is Edgebanding, ...
Kijk hier
Woodworking - Edgebanding
Used SCM industrial machinery – Minimax me 35 from 1996 located in Bel...
Kijk hierSCM Minimax me 35 - Kantenbanding - 2021
Belgium
- Afmetingen werktafel
- 3000 x 525 mm
- Werktafelhoogte
- 904 mm
Woodworking - Edgebanding
Used Soenen hendrik – DVE from 2017 is made in Belgium, with cutting d...
Kijk hier
Woodworking - Edgebanding
Used Hebrock – Euro 2000 Plus from 2007 is made in Germany, with Maxim...
Kijk hierHebrock Euro 2000 Plus - Kantenbanding - 2007
Netherlands
- Gemaakt in
- Duitsland
- Maximale randdikte
- 3 - 8 mm
Woodworking - Edgebanding
Used Biesse – Lato 23S from 2004 is made in Italy. This is edgebanding...
Kijk hier
Woodworking - Edgebanding
Used SCM industrial machinery – Stefani KD from 2017 located in Spain....
Kijk hier
Woodworking - Edgebanding
Used Holzher – UNO 1302 from 2007 is made in Belgium, with Air flow ra...
Kijk hierHolzher UNO 1302 - Kantenaanlijmmachine - 2007
Spain
- Gemaakt in
- België
- Paneeldikte (Min-Max)
- 6 - 45 mm
Woodworking - Edgebanding
Used Bi-matic – Prima 7.3-r.a plus from 2017 made in Italy located in ...
Kijk hierBi-matic Prima 7.3-r.a plus - Kantenaanlijmmachine - 2017
Belgium
- Gemaakt in
- Italië
- Besturingseenheid
- Bi-matic ts 970
Woodworking - Edgebanding
Used Homag – KL 74 from 1998 made in Germany located in Italy. This ed...
Kijk hier
Woodworking - Edgebanding
Used Biesse industrial machinery – Jade 240 from 2019 made in Italy lo...
Kijk hierBiesse Jade 240 - Kantenaanlijmmachine - 2019
Netherlands
- Gemaakt in
- Italië
- Besturingseenheid
- Omron
Woodworking - Edgebanding
Used Holzher – Auriga from 2012 is made in Austria. This edgebanding i...
Kijk hierHolzher Auriga 1307 - Kantenbanding - 2012
Belgium
- Gemaakt in
- Oostenrijk
- Besturingseenheid
- Compacte besturing
Metalworking - Edgebanding
Used Holzher – Primus 1436 SE PVC from 1997 is made in Austria. This ...
Kijk hierHolzher Primus 1436 SE PVC - Kantenbanding - 1997
Austria
- Gemaakt in
- Oostenrijk
- Besturingseenheid
- Holzher
Woodworking - Edgebanding
Used Brandt – KDF 440 from 2013 is made in Germany. This Edgebanding i...
Kijk hierBrandt KDF 440 - Kantenaanlijmmachine - 2013
Netherlands
- Gemaakt in
- Duitsland
- Besturingseenheid
- Power control pc20
Woodworking - CNC machine Edgebanding
Used edger in excellent condition from HolzHer, type SPRIN...
Kijk hierHolzher Sprint 1310-1 - CNC-machine Edgebanding - 2007
Germany
- Gemaakt in
- België
- Dikte werkstuk
- min. 6 / max. 50 mm
Woodworking - edgebanding
Used Bi-matic – Prima 7.3 from 2017 made in Italy located in Belgium. ...
Kijk hierBi-matic Prima 7.3 - Kantenaanlijmmachine - 2017
Belgium
- Gemaakt in
- Italië
- Besturingseenheid
- Bi-matic ts 970
Woodworking - CNC machine Edgebanding
Used edger in excellent condition from HolzHer, type SPRIN...
Kijk hierHolzher SPRINT 1317 - CNC-machine Edgebanding - 2007
Germany
- Gemaakt in
- België
- Dikte werkstuk
- min. 6 / max. 50 mm
Woodworking - Edgebanding
Used Biesse– Akron 1320 from 2015 is made in italy. This Edgebanding i...
Kijk hier
Woodworking - Edgebanding machine
More info:
Machine with all its processes
Header
Trimmer
G...
Kijk hierBiesse Stream B1 9.5 - Kantenaanlijmmachine - 2001
Italy
- Min. paneelbreedte
- 5 mm
- Min. paneellengte
- 100 mm
Woodworking - Edgebanding
More info:
Machine in perfect condition, for multiple functions: Past...
Kijk hier
Woodworking - Edgebanding machine
More info:
Included:
- PLC controlled by programs
- cartrid...
Kijk hierHolzher sprint 1411 - Kantenaanlijmmachine - 1999
Germany
- Dikte van de kantenband
- 13 mm
- Breedte van de kantenband
- 51 mm
Woodworking - Edgebanding Machine
More info:
The machine consists of automatic tenoning carriag...
Kijk hier
Woodworking I Edgebanding Machine
More info:
Machine with inlet shafts, smoothed topping and a ...
Kijk hier
Woodworking - Edgebanding Machine
More info:
Well-functioning edge banding machine for tires an...
Kijk hierHolzher accord 1405 - Kantenaanlijmmachine
Netherlands
- Technische specificaties: Kantdikte
- 8 mm
- Kanthoogte
- 51 mm
Woodworking - Edgebanding machine
___
* Please note that this description may have been transla...
Kijk hierHolzher Auriga 1308 - Houtbewerking - Kantenbanding - 2010
Belgium
- Voedingssnelheid
- 10 m/min
- Werkstuklengte
- min. 160 mm
Edgebanding Machine - Year: 1994
More info:
Machine with:
- Quickmelt hot melt adhesive inform...
Kijk hierBrandt KD 86 - Kantenaanlijmmachine - 1994
Germany
- Werkstukafmeting
- 160 x 65 mm
- Werkstukdikte
- 55 mm
Woodworking - Edbanding machine
____
* Please note that this description may have been translat...
Kijk hierCasadei E550 PM - Edbandmachine - 2018
Italy
- Min./max. paneelhoogte
- min 8 - max 50 mm
- Min./max. kantdikte
- 0,4 - 3 mm (rollen) / 0,4 – 5 mm (stroken)
Edgebanding Machine - Year: 1994
More info:
Edge banding machine for edges up to 3mm with tools...
Kijk hier