CMS POSEIDON
Specificaties
| Fabrikant | CMS |
| Model | Poseidon |
| Jaar | 2014 |
| Conditie | Gebruikt |
| Besturingseenheid | Fanuc 31i-B5 |
| X-as verplaatsing | 8000 mm |
| Y-as verplaatsing | 3800 mm |
| Z-as verplaatsing | 1300 mm |
| C-as rotatie | 300⁰ |
| B-as zwenking | 110⁰ |
| Snelle verplaatsing X/Y/Z | 85 tot 45 m/min |
| C-as rotatiesnelheid | 9000° min |
| B-as zwenksnelheid | 9000° min |
| Motor spindel | 32 kW (S1) |
| Spindelsnelheid | 24000 Rpm |
| Gereedschapopslag | 16 posities |
| Gereedschapsafmetingen | Ø 100 mm x 500 mm |
| Gereedschapsgewicht | 5 Kg |
| E-verbinding | 400V - 50Hz |
| E-waarde | 81 kVA |
| Luchtdruk | 6 bar |
| Afmetingen | L 12600 x H 7600 x B 5000 mm |
| Gewicht machine | 17500 Kg |
| Beschikbaarheid | Onmiddellijk |
| Opmerkingen | *Informatie kan soms onnauwkeurig zijn en zonder kennisgeving veranderen! |
Beschrijving
CNC Machining center 5 Axis -- YOM:2014
More info:
Gantry type high speed 5-axes CNC machining centre, axes are equipped with absolute encoders.
Renishaw TS27 B and C alignment system.
Renishaw NC4 laser tool measuring system,
Renishaw RMP60 3D radio signal probe.
Work area camera surveillance system with 2 cameras,
Electronic steering wheel, manually movable control panel, work area lighting.
Programmable oil mist cooling system (Dropsa Miquel) with 1 nozzle on one side of the spindle tip,
Cold air pistol (Magugliani).
Open top carenage around the work area and electronically controlled sliding doors on 1 front side.
Aluminum clamp plates on the floor, each 3,000 x 1,500 mm, 2 pcs.
Additional clamping table 1,500 x 1,000 mm with T-slots in longitudinal and transverse direction, including
steel brackets to increase the height of the additional clamping table