Nicolas correa FPM-60 - Milling Machine - 1993
Specifiche
| Produttore | Nicolas correa |
| Modello | FPM-60 |
| Anno | 1993 |
| Condizione | Usato |
| Made in | Spain |
| X-axis travel | 9000 mm |
| Y-axis travel | 5000 mm |
| Z-axis travel | 1000 - 1200 mm |
| W-axis travel | 200 mm |
| A-axis travel | +90º / -100º |
| C axis travel | +/-200º |
| Table size | 9000 x 2000 mm |
| Max weight on table | 15000 x 2 Kg |
| Distance between uprights | 3000 mm |
| N° and width of T-slots | 8 x 28 x H12 mm |
| Distance between grooves | 250 mm |
| Spindle speed | 2000 - 4000 rpm |
| Rapid axis (X, Y, Z) | 8000 mm/min |
| Rapids axis W ( rod) | 5000 mm/min |
| Axis A and C (head) | 1125º/min |
| Feed motor torque: (X/Y/Z axes) | 37 Nm |
| Torque of feed motors: W axis (shaft) | 14 Nm |
| Vertical axis (diameter/pitch) | 63/10 mm |
| Cross axis (diameter/pitch) | 80/10 mm |
| Shank axis (diameter/pitch) | 50/10 mm |
| Spindle power | 65 Kw |
| Dimensions | L 14500 x W 9200 x H 6033 mm |
| Weight | 80000 Kg |
| Availability | Immediately |
| Observations | *Information can sometimes be inaccurate and change without notice! |
Descrizione
Metalworking - Milling Machine
Used Nicolas correa – FPM-60 from 1993 made in Spain located in Spain. This milling machine is equipped with a table size of 9000 x 2000 mm, 2000 - 4000 rpm spindle speed, spindle power 65 kW.
Includes the following:
FRONT CHUCK WITH SHANK
Cone type: ISO 50
Power: 42 Kw
Number of ranges : 2
Rotation speed
*Apart from constant
*At constant power: 20-2000 rpm
(3200Nm) 20-125rpm
(42Kw) 125-2000rpm
SPINDLE WITH HEAD 4TH AND 5TH AXES
Cone type: ISO 50
Power: 15 Kw
Number of ranges : 2
Rotation speed
*Apart from constant
*At constant power from 25-4000 rpm
(573Nm) 25-250rpm
(15Kw) 250-4000rpm
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*